We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Steel Plate.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Steel Plate(3mm) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.

Steel Plate Product List

1～30 item / All 42 items

Displayed results
Wear-resistant clad steel plate "EP-TOP"

Wear-resistant clad steel plate "EP-TOP"

Contributes to improved workability! Various combinations of base material and hardened layer thickness are also possible.

"EP-TOP" is a thin plate wear-resistant clad steel plate that pursues the thinning of the plate. By minimizing melting, it achieves a hardened layer of up to 1.5mm while maintaining almost the specified base material thickness. Furthermore, by using this product, you can reduce the weight increase due to wear resistance measures, leading to lighter equipment and improved installation efficiency. 【Features】 ■ Pursues the thinning of the plate ■ Enables equipment weight reduction ■ Improves installation efficiency ■ Enhances workability for processes such as bending, allowing for shapes that were previously impossible to manufacture *For more details, please refer to the PDF document or feel free to contact us.

  • Other metal materials
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Technical Document] Sheet Metal Basics Course - Session 2: Materials Used in Sheet Metal Processing

[Technical Document] Sheet Metal Basics Course - Session 2: Materials Used in Sheet Metal Processing

The size of materials mainly used as sheet metal is determined by JIS standards.

The materials used in sheet metal processing mainly include soft steel plates, stainless steel plates, surface-treated steel plates, aluminum plates, and copper plates. Steel plates are classified by thickness into thick plates (6mm or more), medium plates (3mm or more but less than 6mm), and thin plates (less than 3mm). This document introduces "materials used in sheet metal processing," as well as "classification of sheet metal materials" and "standard materials and sketch materials." Please feel free to download and take a look. [Contents] ■ Materials used in sheet metal processing ■ Classification of sheet metal materials ■ Let's memorize material symbols ■ Standard materials and sketch materials *For more details, please refer to the PDF document or feel free to contact us.

  • 板金加工の材料.png
  • Processing Contract
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: A mining company achieved improved machine lifespan and profitability with superior wear-resistant steel plates.

Example: A mining company achieved improved machine lifespan and profitability with superior wear-resistant steel plates.

As a result of trying various brands, the one that clearly demonstrated superior performance was SSAB's Hardox(R) 550/600!

Asia's leading open-pit copper mine, the Dexing Copper Mine, was searching for more durable wear-resistant steel plates for its hopper liner plates. **Challenges** - The hopper liner plates wear out quickly due to the harsh daily operations. - Replacing the plates takes two weeks, and maintenance is not easy. - Frequent replacements lead to increased workload and downtime. ~Adoption of Hardox® wear-resistant steel plates~ 1. Hardox® 550/600 was used on the sides and bottom of 18 ore extraction machines. 2. The lifespan of the liner plates has been extended by 2 to 3 times. 3. Maintenance frequency has decreased, and the plate replacement frequency has improved to every two years. 4. The use of thinner wear-resistant steel plates has reduced engine load. By adopting SSAB's Hardox® 550/600, work efficiency has increased, leading to higher production and increased revenue. *For more details, please contact us or download the PDF document to view.*

  • Special Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: Manufacturing concrete mixers made of Hardox(R) wear-resistant steel plates.

Example: Manufacturing concrete mixers made of Hardox(R) wear-resistant steel plates.

The new lightweight concrete mixer made of 3mm thick wear-resistant steel plate is bringing significant cost savings to users.

One of Europe's leading concrete mixer manufacturers, Intermix, places the utmost importance on innovation, flexibility, and quality. For truck mixers, keeping the empty weight to a minimum is critically important for business operations. Weight reduction leads to increased maximum payload, as well as cost savings on fuel, tires, fees, and taxes. Furthermore, in some countries, companies can comply with regulations regarding empty weight and total weight through weight reduction. [Challenges] - Concrete is heavy at 2.4 tons per cubic meter, so we want to improve both maximum payloads. ~Using Hardox® wear-resistant steel plates for concrete mixer components~ 1. Using 3mm thick Hardox® wear-resistant steel plates for the concrete drum and internal mixing blades. 2. Enables a structural weight reduction of 18%. 3. The lifespan of the concrete mixer remains unchanged even with reduced thickness. Considering the significant interest in various countries, including Germany, we expect to increase sales in a large part of the European market in the near future. *For more details, please contact us or download the PDF materials for review.

  • Special Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: Blades made of Hardox® wear-resistant steel are active in a sugar factory.

Example: Blades made of Hardox® wear-resistant steel are active in a sugar factory.

By switching the blade material to Hardox(R)500, we achieve improved efficiency.

The knife used to cut the fibrous stalks before crushing the hard sugarcane in a large press needed to withstand the acid-like juice of the sugarcane. Only robust and wear-resistant blades can achieve this. **Challenges at the Ingenio de Atencingo sugar factory in Mexico:** - Short knife lifespan - Time-consuming knife maintenance - Resulting unnecessary downtime ~Switching the blade material to Hardox(R)500~ 1. Knife lifespan increased threefold 2. Reduced maintenance time 3. Avoidance of unnecessary downtime 4. Improved final results By changing the material of the cutting knife previously used to Hardox(R)500, Ingenio de Atencingo was able to enhance efficiency and ultimately improve final results. *For more details, please contact us or download the PDF materials to learn more.*

  • Special Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
【SCM440】Thick steel plates from 9mm to 220mm are always in stock!

【SCM440】Thick steel plates from 9mm to 220mm are always in stock!

With 90 years of experience in handling steel, we are a trusted long-established company. We have achieved short delivery times from cutting to annealing! We are currently introducing case studies in our materials.

We always have thick steel plates made of SCM440 chrome-molybdenum material in stock, ranging from 9mm to 220mm. By installing an annealing furnace in-house, we have achieved short lead times from cutting to annealing! We accept orders starting from just one piece. For quotes and orders, please feel free to contact us by phone, fax, or through the inquiry form on our website. *Please note that there may be cases where stock items are not available. For details, please inquire. 【Cutting Services】 Dimension cutting Shape cutting Double cutting Beveling Provided materials 【Cutting Length】 Up to a maximum of 2500mm We have cutting experience for thicknesses up to 300mm. Additionally, we can also perform flame cutting on other parts such as forged products and machined items. 【Cutting Examples】 Squares, circles, crushing blades, jigs, molds, cams, plates, frames, arms, brackets, connecting rods, etc. 【Other Processing】 Warp correction, annealing, hardening, tempering, shot blasting, and other machining processes to finished products, various inspections, and non-destructive testing (UT, MT, PT).

  • Special Steel
  • Special Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metal Super SUS304 patterned steel plate

Metal Super SUS304 patterned steel plate

Cut-to-order available! Introduction of SUS304 striped steel plates.

At Yamamoto Tech Co., Ltd.'s online metal materials sales site "Metal Super Dot Com," we handle "SUS304 patterned steel plates." This product is available for cut sales. Please contact us for pricing. *For more details, please refer to the PDF document or feel free to contact us.

  • Other services
  • Other metal materials
  • stainless
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Steel plate business

Steel plate business

We have adopted a fully automated control system for all lines using computers!

Our steel plate division operates a coil center business. We possess cutting equipment capable of delivering steel products to various customers, including those in the automotive, home appliance, and construction materials sectors. We have established a consistent system from receiving to shipping, utilizing barcode verification. We have achieved production system rationalization through the introduction of automatic blade assembly robots and ensured product quality with surface inspection machines. 【Products Handled】 ■ Hot-dip galvanized steel sheets (Applications: civil engineering and construction, automotive, ships, electrical machinery, industrial machinery) ■ Alloyed hot-dip galvanized steel sheets (Applications: construction materials, automotive, electrical machinery) ■ Electro-galvanized steel sheets (Applications: home appliances, office automation equipment, electronic components) ■ Pickled steel sheets (Applications: construction materials, industrial machinery, automotive) ■ Cold-rolled steel sheets (Applications: automotive, steel furniture, home appliances, construction materials) *For more details, please download the PDF or feel free to contact us.

  • Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Next-generation Galvalume steel sheet "SGL"

Next-generation Galvalume steel sheet "SGL"

Unique corrosion resistance enhancement mechanism! Achieving performance that surpasses Galvalume steel sheets.

"SGEL" is a next-generation galvalume steel sheet that achieves further corrosion resistance improvement based on galvalume steel (55% aluminum-zinc alloy coated steel sheet). Magnesium has been newly added to the coating composition of galvalume steel. While inheriting the unique alloy coating structure of the steel sheet, the coating layer has been strengthened by the action of magnesium, resulting in over three times the corrosion resistance of galvalume steel. This product is a new material that brings together our wisdom to meet the demands of the times. 【Features】 ■ Over three times the corrosion resistance of galvalume steel ■ 25-year perforation warranty (beyond 500m from the coast) ■ Excellent thermal reflectivity ■ Ideal as a substrate for painted steel sheets ■ Processability and weldability equivalent to galvalume steel *For more details, please refer to the PDF document or feel free to contact us.

  • Other metal materials
  • others
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Precision processing of bonded steel sheets using a YAG laser welding machine.

Precision processing of bonded steel sheets using a YAG laser welding machine.

We respond to a wide range of needs with advanced precision sheet metal processing technology.

Precision sheet metal processing, precision prototype processing, enclosure processing... We respond to a wide range of needs with advanced precision sheet metal processing technology. Please make use of Shinwa's latest technology. Precision processing with a YAG laser welding machine. Bonded steel plate 1.6mm, length 1000mm. For more details, please download the catalog or contact us.

  • Processing Contract
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metal Super SUS304 Plate (No. 1)

Metal Super SUS304 Plate (No. 1)

Cutting and selling available! Introduction of SUS304 plate No.1 finish.

At Yamamoto Tech Co., Ltd.'s online metal materials sales site "Metal Super Dot Com," we offer "SUS304 Plate (No. 1)." This product is available for cut-to-order sales. For thin plates, we primarily use shearing, while for thick plates, we use cutters or lasers (for cutting complex shapes) and plasma cutting (for rough cuts). Please contact us for pricing. *For more details, please refer to the PDF document or feel free to contact us.

  • Other services
  • Other metal materials
  • stainless
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: A Russian garbage truck manufacturer achieved a rapid return on investment after implementation.

Example: A Russian garbage truck manufacturer achieved a rapid return on investment after implementation.

The upgrade of materials has significantly improved the quality of the tail and extended its lifespan, leading to cost reduction!

The tail of the regular garbage collection truck manufactured by the Russian waste collection vehicle manufacturer MosKomMash was made of ordinary steel with a thickness of 8mm and used reinforcements at the bottom. In response to changes in the economy, the company began to seek greater efficiency in production and materials. **Challenges** - Since they focused on mass production, they had not considered introducing Hardox® wear-resistant steel plates. ~Using Hardox® 450 in their truck production~ 1. During the recession, a sales representative from SSAB Moscow visited. 2. The tail of two test vehicles was replaced from a thickness of 8mm to 5mm. 3. Reinforcements were removed. The introduction of Hardox® wear-resistant steel plates, the first of its kind for this application in Russia, significantly improved the quality and reliability of MosKomMash trucks. *For more details, please contact us or download the PDF materials to view.*

  • Special Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Perforated steel plate Hardy Floor G Full Flat C

Perforated steel plate Hardy Floor G Full Flat C

Only necessary locations on the floor surface will have elongated holes, while the rest will be a flat floor! This revolutionary flooring material allows for flexible elongated hole placement according to operational needs and layout.

Features 1. Excellent Workability Using dedicated mounting brackets, installation can be easily done by simply securing the floor through the long holes on the top surface. Since there is no need for welding or work from the back side, it can be safely completed in a short period of time. 2. Flexible Design Options In addition to the mounting points for the floor installation brackets, long holes can be provided at positions necessary for operation. It is also possible to specify areas without holes in places where you want to block the long holes.

  • others
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hoshin Industry Co., Ltd. Company Profile

Hoshin Industry Co., Ltd. Company Profile

Stable supply of steel products with advanced technology and services! Responding to diverse needs with "integrated production"!

Our company is a specialist in iron, handling everything from material procurement to processing. We can engage in a consistent process from "design → cutting → bending → welding and painting." We achieve optimization of quality, cost, and delivery time to meet diverse needs. Please consult us for all steel plate processing from design to painting, with thicknesses ranging from 0.3mm to 100mm. 【Main Business Activities】 ■ Types of Steel Plates Handled - Cold-rolled steel plates, hot-rolled steel plates, surface-treated steel plates, medium-thick steel plates ■ Processing Department - Leveling, slitting, shearing, NC cutting, laser cutting - Plasma cutting, bending, welding, painting ■ New Processing Department - Fiber laser combination machines, turret punch presses, bending, welding *For more details, please refer to the PDF materials or feel free to contact us.

  • Steel
  • Processing Contract
  • Contract manufacturing
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Suruga Corporation Company Profile

Suruga Corporation Company Profile

In addition to processing a variety of materials such as metal, paper, and wood, we have also obtained a logistics business license and are expanding our transportation services!

At Suruga Corporation, we operate three business divisions: logistics packaging, steel plate, and building materials. We have the Kameyama Factory, which specializes in processing steel plates ranging from 0.1mm to 3.2mm, as well as the Sagamihara Factory, Oigawa Factory, and Ibaraki Factory, which excel in the production of packaging materials related to logistics. We aim to be a company that can play a part in our customers' business models, from manufacturing to delivery. Please feel free to entrust us with your needs. 【Business Activities】 ■ Logistics Packaging Business ■ Steel Plate Business ■ Building Materials Business *For more details, please refer to the PDF document or feel free to contact us.

  • Other metal materials
  • Paper and pulp products
  • Wood products
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: A Japanese manufacturer adopts SSAB steel plates to improve the quality of containers.

Example: A Japanese manufacturer adopts SSAB steel plates to improve the quality of containers.

Thanks to the new design, the load capacity has improved by 15%!

Container manufacturer Ellermann wanted to enhance the loading capacity without changing the size of the containers. Until then, they had been making containers from aluminum but were looking for a stronger and lighter material. 【Challenges】 - Enhance loading capacity without changing the size of the containers - Reduce the weight of the containers ~Adoption of SSAB's high-strength steel plate Hardox(R) wear-resistant steel~ 1. Used in the floor and side walls of their containers 2. Loading space increased from 40㎥ to 42㎥ 3. Significant reduction in container weight = advantages in terms of weight Through improvements in container quality, Ellermann increased the loading capacity by 1.5 tons, and by 3 tons for 20-ton trucks, resulting in a 15% improvement in loading capacity. *For more details, please contact us or download the PDF materials for review.

  • Special Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
S45C plate material, flame-cut, steel plate, cut plate

S45C plate material, flame-cut, steel plate, cut plate

We respond to all customers with 'full effort' at any time! You can trust us with complex shapes as well.

We perform cutting of simple shapes such as corners and circles, as well as complex shapes, using S45C plates. We have a tempering furnace installed in-house, allowing us to respond to short delivery times even for tempering (A - annealing) after cutting. Additionally, items that cannot be cut in one go can be handled with two or three cuts. Please feel free to contact us when you need assistance. 【Stock】 Plate thickness: 12mm to 200mm *For more details, please refer to the PDF document or feel free to contact us. Special steel, gas cutting, short delivery, mold cutting, cost reduction, process shortening, melting cutting.

  • Special Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-strength folded plate "Nisculroof L145"

High-strength folded plate "Nisculroof L145"

The innovative lightning line created by the two-stage joint method! It creates a dynamic and beautiful roof appearance.

"Niscloof L145" is a sharp and beautiful roofing material that achieves high strength through a two-stage interlocking method and excellent workability without the need for clips. It is a revolutionary product that eliminates the hassle of clip fastening and integrates a folded plate with high-strength double interlocking. In addition, we also offer the "Niscloof L145 Double Folded Plate Method." 【Features】 ■ High wind pressure resistance strength due to the two-stage interlocking method ■ Allowable joint strength per ridge: 10,170N ■ Improved workability without clips ■ Increased economy with high strength ■ Sharp and beautiful roof design ■ 30-minute fire resistance structure certification for roofs *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Weakly acidic environment compatible new wear-resistant steel plate Hardox HiAce

Weakly acidic environment compatible new wear-resistant steel plate Hardox HiAce

Hardox HiAce has excellent properties comparable to Hardox 450 and addresses the wear challenges in low pH, weakly acidic environments.

Hardox HiAce is a true wear fighter, especially in mildly acidic corrosive environments that can be detrimental to equipment. This corrosion-resistant steel plate protects equipment from general corrosion and pitting, and is expected to improve equipment condition and extend its lifespan. It helps address the challenges of corrosive wear environments found in urban and industrial waste management, waste-to-energy plants, mining, and process industries.

  • ゴミ収集車.jpg
  • 01-HARDOX　HIACE.JPG
  • IMG_7309.JPG
  • Other metal materials
  • Contract manufacturing
  • Other machine elements
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: Gjerstad takes a step ahead with design and Hardox(R)

Example: Gjerstad takes a step ahead with design and Hardox(R)

The steel plate and new design have met our company's and customers' expectations in every aspect!

Norwegian excavator bucket manufacturer Gjerstad decided to improve the performance of its products just over a year ago. Gjerstad is known for using a wide range of SSAB steel plates. For over 20 years, the company has supplied steel plates for bucket wear parts. [Gjerstad's Wishes] - Emphasis on important financial aspects for customers - Being more than just a sticker that meets customer expectations - Reduction of maintenance costs - A completely new design - Valuable support ~By using Hardox(R)500, far ahead of competitors~ 1. Manufacturing lighter buckets by switching from Hardox(R)450 to Hardox(R)500 2. Lighter and stronger than buckets of the same size = reduced fuel consumption 3. This experience has led to a noticeable reduction in maintenance costs 4. A comprehensive redesign has improved performance Since SSAB operates in all regions where Gjerstad outsources manufacturing, it has been easy to arrange visits to manufacturing sites and on-site seminars. *For more details, please contact us or download the PDF materials.

  • Special Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: Achieving Innovation and Success through Strong Partnerships (HCRDI)

Example: Achieving Innovation and Success through Strong Partnerships (HCRDI)

A wear-resistant solution has been born that achieves less maintenance time and a longer service life!

HCRDI's products play an important role in cement production. Cement clinker crushed by a roller press is sent to a cement mill for final grinding. Then, it is separated into fine and coarse particles by a separator. The fine particles are collected, while the coarse particles are returned to the previous process for further grinding. 【Challenges for HCRDI】 - Although they used their own wear-resistant surface materials, they could not meet high standards. - Aiming for cost-efficient processes leads to compromises in quality. - Numerous issues arise during the replacement of liner plates. ~Adoption of Hardox(R) wear-resistant steel plates~ 1. Engineers were dispatched for a global fact-finding mission. 2. Extensive testing was conducted, and since 2005, Hardox(R) 500 steel plates have been used. 3. Achieving a long service life with minimal maintenance time, a wear-resistant solution was born. HCRDI's engineers continue to maintain ongoing communication with us. The close relationship between SSAB and HCRDI has led to increased sales and employee growth. *For more details, please contact us or download the PDF materials for review.

  • Special Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Iwata Seiko Co., Ltd. Technical Introduction

Iwata Seiko Co., Ltd. Technical Introduction

From precision to ultra-precision, from thin materials to ultra-thin materials. Challenge is the commitment to technology.

Iwata Seiko Co., Ltd. primarily processes palm-sized items ranging from 0.02t to 2.0t using press processing. We own press equipment ranging from 30t to 110t. We have confidence in processing materials such as iron, aluminum, stainless steel, and copper, including punching, bending, drawing, and crushing, especially in aluminum processing. The products we process include automotive parts, mobile phone-related parts, lithium-ion battery-related parts, solar power generation-related parts, and low-voltage components. Most of the molds used for press processing are produced in-house, allowing for cost reduction, shorter delivery times, and improved quality. In the event of mold troubles, we have a system in place to respond immediately. Additionally, with our well-equipped facilities and extensive experience, we invite you to consult us regarding any challenges you may face. We can meet a wide range of processing needs, from small lot single processing to progressive processing in the tens of thousands. Please also consult us regarding press processing and mold maintenance using molds produced by other companies. For more details, please contact us or refer to our catalog.

  • Processing Contract
  • Other machine elements
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Corrosion-resistant wear plate "Hardox HiAce"

Corrosion-resistant wear plate "Hardox HiAce"

Prevention of corrosion in acidic and humid environments. Achieves high hardness and excellent wear resistance. Also excels in workability, with uniform and consistent quality.

The corrosion-resistant wear plate "Hardox HiAce" is a material that solves the problems of corrosion and wear in fields such as waste management, waste-to-energy plants, mining industry, and processing industry. While it has a Brinell hardness equivalent to "Hardox 450" in the same series (425–475 HBW), it achieves an excellent minimum value of 27 J at -20°C in the Charpy impact test, extending its lifespan in lower pH environments by 2.7 times. 【Features】 ■ Prevents corrosion of machinery and equipment in acidic corrosive environments ■ Available in thicknesses from 4.0 to 38 mm, with a maximum width of 2,500 mm and a maximum length of 11,000 mm ■ Suitable for operation in sub-zero temperatures ■ Achieves significant reduction in CO2 emissions during production *For detailed specifications, please download the catalog. <We will be exhibiting at the 2025 New Environment Exhibition / Global Warming Prevention Exhibition> May 28 (Wed) - 30 (Fri), 2025 Tokyo Big Sight, Booth Number: East Hall 3 A346 We sincerely look forward to your visit!

  • Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: Hardox(R) wear-resistant steel plates contribute to pipe laying construction.

Example: Hardox(R) wear-resistant steel plates contribute to pipe laying construction.

A newly created pipe made from Hardox® 400 has led to a solution for the unstable chain.

Corazza, a major manufacturer of civil engineering machinery, quarrying machines, excavation machines, and demolition machines, received inquiries from customers regarding stability issues during pipe laying. In response, Corazza and SSAB collaborated and came up with a fantastic innovation. 【Challenges】 - Stability during pipe laying (unstable chains) as reported by customers while developing high-quality products. - Resulting loss of working time and the scope of the work area. ~The Speedy Pipe, born from the collaboration between Corazza and SSAB, incorporates Hardox(R) 400~ 1. A solution for unstable chains with newly created pipes. 2. Improved strength, robustness, and lifespan. 3. Expanded work area, eliminating the need for ground or underground operations. As a result, the Corazza brand has spread worldwide, and the Hardox(R) wear-resistant steel plate series is utilized in various products. *For more details, please contact us or download the PDF materials for review.*

  • Special Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: Hardox(R) HiTuf shredder is very popular.

Example: Hardox(R) HiTuf shredder is very popular.

SSAB provides thorough explanations of everything necessary, including preheating, post-heating, and welding wires.

The major company Pacific Shredder designs and manufactures shredders that can turn cars into scrap in just a few seconds. Pacific Shredder was searching for superior steel plates due to their strength and longevity. [Challenges] - Regular steel plates are weak against cracks and wear, requiring frequent replacements. - Durability is crucial, not just to avoid production losses from failures. - Competitors' products lack the thorough hardness necessary for shredders. ~Adoption of Hardox(R) HiTuf for car shredder components~ 1. It is a high-tensile and wear-resistant steel plate among those used so far. 2. SSAB is a rare manufacturer that produces steel plates with excellent resistance in the required thicknesses of 100 mm and 120 mm. 3. They provide thorough explanations for all necessary processes, including preheating, post-heating, and welding wire. As a result of adopting Hardox(R) HiTuf, Pacific Shredder succeeded in manufacturing a durable shredder that continues to operate normally with steel plates that would otherwise be considered scrap by other companies, which is difficult to achieve with ordinary steel. *For more details, please contact us or download the PDF materials for review.*

  • Special Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: Thinner steel plates reduce the weight and waste of garbage collection vehicles.

Example: Thinner steel plates reduce the weight and waste of garbage collection vehicles.

We can manufacture vehicles that can carry more with less fuel.

Labrie Environmental Group is one of the leading companies in the market for manufacturing machinery for the waste management and recycling industries. Labrie sells waste collection vehicles that boast some of the best performance in the market and is always striving to create vehicles that are stronger, lighter, and more durable. **Challenges** - The truck chassis must constantly withstand heavy impact, leading to serious wear on the truck's flooring. ~Adopting Hardox® wear-resistant steel plates for the truck chassis~ 1. Previously, when using other steel plates, parts replacement and maintenance were frequent. 2. By using Hardox® wear-resistant steel plates, maintenance costs have been reduced. 3. The lightweight design of the vehicles increases the maximum payload within legal limits, allowing for more efficient operations. Using a single Hardox® wear-resistant steel plate eliminates welded joints, enhancing durability and corrosion resistance. This also significantly increases the flat surfaces available for advertising and photography, improving the overall appearance. *For more details, please contact us or download the PDF materials for review.*

  • Special Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Yield Point Control Steel Plate for Steel Braces

Yield Point Control Steel Plate for Steel Braces

The variation in the yield point is small! A steel plate that can easily achieve design goals.

The "Yield Point Control Steel Plate" maximizes the use of its unique electric furnace thick plate manufacturing line for small-lot, diverse product manufacturing technology, reducing variations in yield point through fine-tuning of component ratios for each product thickness and special rolling. The standard range for the yield point has been narrowed to about one-third of the range of JIS standard SN steel materials. By using this product in steel braces, which are one type of vibration control device, design goals can be easily achieved. 【Features】 ■ Small variation in yield point (upper and lower limits of product specifications are 50 N/mm²) ■ Excellent weldability ■ Capable of short delivery times For more details, please refer to the catalog or feel free to contact us.

  • Steel
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Presenting a collection of Q&A on steel plate cutting and processing.

Presenting a collection of Q&A on steel plate cutting and processing.

We will meet various processing needs. A large number of Q&A regarding processing are available! *Factory tours are also being conducted!

Hougetsu Industry uses various thicknesses, materials, and sizes of steel plates to meet a wide range of processing needs. We deliver a diverse array of products utilizing the technology and extensive equipment we have cultivated over many years. These products are used in various applications, including construction machinery, steel frames, civil engineering, bridges, industrial machinery, and industrial vehicles. This document contains numerous Q&A related to processing, providing detailed answers to frequently asked questions about the processing services we offer. It is a useful resource for those considering processing with us. 【Q&A Frequently Asked Questions (Partial)】 ■Q1: Is there a minimum order quantity? ■Q2: What materials can you process? ■Q3: Is it possible to handle painting as well? ■Q4: Can you accommodate welding? ■Q5: What is the maximum thickness for laser cutting? *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Contract
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mizuho Spring Manufacturing Co., Ltd. Business Introduction

Mizuho Spring Manufacturing Co., Ltd. Business Introduction

Leave precision springs and precision press manufacturing to us.

Our company can handle all aspects of press parts in-house, including mold design and manufacturing, press processing, degreasing and cleaning, barrel processing, austempering, heat treatment, riveting, and tapping. Manufacturing is composed of four departments: mold design and manufacturing, precision press processing (thickness 0.05 to 2.5 mm), precision spring processing (diameter 0.05 mm to 2.0 mm), and assembly. With years of know-how, we can meet expectations for the precision of complex-shaped springs. Additionally, we can accommodate various assembly needs, from individual assembly to line production. 【Business Activities】 ■ Precision mold design ■ Precision pressing ■ Precision wire springs ■ Heat treatment ■ Assembly processing *For more details, please download the PDF or contact us.

  • Spring
  • Contract manufacturing
  • Processing Contract
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Special Steel SK85 Hot Rolled Sheet Sales

Special Steel SK85 Hot Rolled Sheet Sales

Cutting to your desired width is possible through shearing. Reliable, quick, and careful. We can also accommodate requests for local shipping and small lots (minimum lot available).

Our company sells special steel (sheets and plates). If you wish, we can cut the specified plate material to the desired width using our shearing machine. * We also accommodate sales of large plates (standard sizes). * We can ship to remote areas, so we can serve you even from afar. Our stock items range from a minimum thickness of 0.5mm to a maximum thickness of 12.0mm. We can cut various plate thicknesses and steel types in-house. With our long-standing experience and technical expertise, we will do our utmost to meet your needs. - Carbon steel for machine structures (S45C to S55C, etc.) - Carbon tool steel (SK85) - Alloy tool steel (SKS5) - Alloy steel for machine structures (SCM415 to SCM435) We have a wide range of steel types and plate thicknesses in stock. Please feel free to contact us with any questions or requests. 【Products handled】 S45C, S50C, S55C, S55CM, SK85, SK85M, SKS5, SCM415, SCM435...etc. * Please check our catalog for details on each material, finish, plate thickness, and standard width.

  • Special Steel
  • Steel
  • Plastic processing machines (cutting and rolling)
  • Steel Plate

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Steel Plate

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.